Torsional statics of two-dimensionally functionally graded microtubes

A size-dependent governing equation is derived to investigate the torsional static behaviors of two-dimensionally functionally graded microtubes based on the modified couple stress theory. The shear modulus is assumed to vary along the tube’s length direction according to an exponential distribute function, and varies along the tube’s radius direction according to a power-law function. A generalized differential quadrature method is developed to determine the rotational angle and shear stresses. Some illustrative examples are given to investigate the effects of applied torques, the length scale parameter and various material compositions on the torsional angle and shear stresses.     

竹材液化墙体泡沫材料的阻燃改性

为提高竹材液化产物所制备的高轻发泡墙体材料的防火性能，分别采用材料内部添加和表面浸泡的方法进行阻燃改性，并评价不同阻燃剂及其添加量对发泡材料阻燃性能的影响。实验结果表明：在材料内部或表面添加选择的阻燃剂不会对材料自身形貌或组分产生明显影响，对材料的力学性能亦不会造成破坏，在材料内部添加3 g膨胀型凝胶-二氧化硅/聚磷酸铵核壳阻燃剂（MCAPP）后压缩强度达到了0.37 MPa，在材料表面浸泡聚硅氧烷后压缩强度达到了0.58 MPa，同时能提高材料的阻燃性能，在材料内部添加聚磷酸铵（M-APP）后极限氧指数提高到33.2%，比改性前提高3%。在材料表面浸泡膨胀型壳聚糖-蒙脱土-聚磷酸铵（CMAp）后点燃时间明显延长，极限氧指数最高达到了31.5%。     

稀土修饰铁碳材料对糖蜜酒精废水处理效果的研究

采用还原铁粉、碳粉、稀土铈及黏结剂等为原料混合制成的Ce-Fe/C复合材料深度处理糖蜜酒精废水,研究了铁碳质量比、稀土铈添加量以及废水处理时间等因素对处理效果的影响。结果表明:以铁碳质量比为5∶1,稀土铈添加质量分数为7%制备的Ce-Fe/C复合材料处理糖蜜酒精废水,当反应时间为150 min时,色度去除率达98%以上,COD去除率达70%以上。对制备的复合材料的表征结果表明,稀土元素Ce有效地掺杂到Fe/C材料的晶格中,提高了Fe/C材料的性能。     

仿生雾水收集材料：从基础研究到性能提升策略

由于水资源污染、淡水资源日益匮乏，水危机已经严重影响到人们的日常生活。从晨雾中捕获水气则可以缓解干旱地区的缺水问题。受纳米布沙漠甲虫、仙人掌、蜘蛛丝等动植物自发捕集雾水的启发，构建特殊润湿性的仿生雾水收集材料备受关注。详细总结了仿生雾水收集材料的最新研究进展，讨论了仿生集水材料的设计和制备方法，并从雾水收集的四大仿生策略出发，介绍了提升雾水收集效率的设计方案。在此基础上，分析了当前仿生雾水收集过程存在的问题，展望了此类材料未来的发展趋势和方向。     

高性能三水醋酸钠-尿素-膨胀石墨混合相变材料的制备及其在电地暖中的应用性能

采用尿素调节三水醋酸钠的相变温度到合适范围再添加膨胀石墨来降低过冷度，研制了高性能的三水醋酸钠-尿素-膨胀石墨混合相变材料，并对其在电地暖中的应用性能进行了研究。结果表明，当尿素质量分数为36.5%、膨胀石墨添加量为4%(质量)时，所得混合相变材料的熔化焓高达209.1 J/g，熔点在31.98℃，过冷度仅为2.04℃，热导率为2.349 W/(m·K)，热可靠性良好；将用该混合相变材料制成的相变板安装在实验房的电地暖中时，实验房的热舒适度随着相变材料层厚度的增加而增加，但也带来加热时间和用电量的增加；当相变材料层厚度为10 mm时，电加热温度适宜设置在45℃；在热舒适度相当的条件下，有相变板的实验房与无相变板的参比房相比具有用电量小及电费低的优势。     

The effect of transition metal carbides MeC (Me = Ti,Zr, Nb,Ta, and W) on mechanical properties of B4C ceramics fabricated via pressureless sintering

In this study, boron carbide-metallic boride (B₄C-MeB_x, Me = Ti, Zr, Nb, Ta, or W) multiphase ceramics were fabricated via in situ pressureless sintering at 2250 °C for 1 h. The effects of transition metal carbides, namely, TiC, ZrC, NbC, TaC, and WC, on the phase composition, microstructure, and mechanical properties of the ceramics were investigated. The results showed that MeC could facilitate the sintering densification of B₄C by distributing second-phase particles uniformly throughout the B₄C. Additionally, the main phases observed were B₄C and (Me, W)B_x (Me = Ti, Zr, Nb, or Ta) due to the doping of a small amount of WC during the ball milling process. As a result, the mechanical properties of B₄C-MeB_x showed significant improvements when compared with those of single-phase B₄C ceramics. B₄C–NbB₂ ceramics were found to exhibit the best mechanical properties, with an elastic modulus of 393.0 GPa, a hardness of 28.7 GPa, a flexural strength of 368.0 MPa, and a fracture toughness of 6.94 MPa m^1/2.     

基于临界钙矾石膨胀破坏的磷石膏基复合胶凝材料的配料计算研究

为制备大掺量磷石膏基复合胶凝材料,在确定主要水化产物类型的基础上,通过计算临界钙矾石膨胀破坏的边界条件,确定各组分最佳掺量范围,研究其对复合胶凝材料力学性能、干缩性能的影响,并通过X射线衍射（XRD）、扫描电镜（SEM）等测试方法研究水化产物的组成及发展规律。研究结果表明：通过理论配料计算,矿粉掺量为50%（质量分数）时,最大磷石膏掺量为26.3%（质量分数）,最小熟料掺量为23.6%（质量分数）。最佳配比组28 d胶砂抗压强度为45.2 MPa,线膨胀率小于0.04%;对比组28 d抗压强度仅有36.4 MPa,线膨胀率远大于0.04%。XRD、SEM表征结果表明,磷石膏基复合胶凝材料的水化产物主要是钙矾石（AFt）和水化硅酸钙（C-S-H）凝胶,氢氧化钙几乎反应完全;对比组钙矾石生成量远大于最佳配料组,微观结构存在大量裂缝。这说明理论配料计算可以有效用于磷石膏基复合胶凝材料的配比优化。     

New ways to improve the damping properties in high‐performance thermoplastic vulcanizates

The incorporation of viscoelastic materials represents an effective strategy to reduce the vibratory level of structural components. Thermoplastic vulcanizates (TPVs) are a special type of viscoelastic material that combines the elastomeric properties of rubbers with the easy processing of thermoplastics. In the present work, we propose innovative ways to improve the damping properties of high‐performance TPVs by using rubbers with carboxylic functionalities. For that, TPVs from physical blends of carboxylated hydrogenated acrylonitrile butadiene rubber (XHNBR) and polyamide 6 (PA6) were prepared. The chain dynamics of different mixed crosslink systems containing peroxide, metal oxides and hindered phenolic antioxidants were investigated in order to find the most suitable strategy to design a high‐performance TPV system with upgraded damping properties. The results indicate that the damping performance of the TPV system can be tailored by controlling the type and magnitude of the bonding interactions between the mixed crosslink system and the XHNBR rubber phase. Therefore, this study demonstrates the potential of TPV systems containing carboxylic rubbers as high‐performance damping materials. © 2020 Society of Chemical Industry     

基于步冷试验的2.25Cr-1Mo-0.25V钢母材及焊缝回火脆化研究

对原始态、步冷态、脱脆态和脱脆步冷态2.25Cr-1Mo-0.25V钢母材及焊缝冲击试验结果进行分析,得到了母材和焊缝在不同状态下的韧脆转变温度vTr54.2和FATT以及脆化度ΔvTr54.2和ΔFATT。试验结果表明,步冷试验之后,母材发生较低程度脆化或脱脆现象,但是脆化度或脱脆度较低,表明母材具有良好的抗回火脆化性能;经脱脆试验后,母材和焊缝都发生较高程度的脱脆,表明材料的脆化主要是由于回火脆化引起的,脱脆试验使得材料的韧脆转变温度降低;脱脆步冷试验后,焊缝发生较高程度的脆化,焊缝对脱脆步冷试验的敏感性较高,脱脆步冷试验有效促进了焊缝的脆化。在相同脆化条件下,母材的脆化敏感性低于焊缝,焊缝更易发生脆化。